Commercial · Gainesville, FL
Turn your bays into easy-to-clean, chemical-resistant work areas with a properly built auto shop epoxy floor. Elite Epoxy Gainesville has served Gainesville since 2018, installing and repairing shop-grade epoxy and polyaspartic systems that hold up to lifts, jack stands, and daily traffic.
Auto shop floors fail when prep is skipped, so we start with concrete testing and mechanical profiling. We check for moisture vapor (ASTM F2170), identify oil saturation, and cut out soft or delaminated areas. Surface prep is done with a planetary diamond grinder and HEPA dust control to reach a CSP 2-3 profile, then we patch spalls and cracks with epoxy mortar or a fast-cure polyurea crack repair. From there we install a penetrating epoxy primer and a high-build epoxy base coat to lock down dust and create a tight bond to the slab.
North Florida humidity and moisture drive coating choices, especially in shops with frequent wash-downs. If conditions call for it, we use a moisture-mitigating epoxy primer before the build coats to reduce blistering and peeling. For traction and safety we can broadcast aluminum oxide or silica to a targeted slip-resistance, then topcoat with a chemical-resistant urethane or a UV-stable polyaspartic for bright, easy-to-see work areas. Finish options include solid color, light-reflective grays, or full flake broadcast for better scratch hiding, plus cove base at walls to keep fluids out of joints.
Gainesville customers choose us because we build floors like working equipment, not showroom paint. You get clear system specs (product type, mil thickness, broadcast rate), written prep scope, and a plan for managing downtime around service bays and lifts. Our crew is licensed and insured, and we focus on details that matter in a shop, like joint transitions, drain edges, and coating termination lines that do not peel under rolling loads. When a floor is already failing, we diagnose the cause first, whether it is moisture vapor, contamination, or improper surface profile, then repair it the right way.
At closeout we walk the floor with you under good lighting and confirm coverage, texture, and edge work, then mark any touch-ups before final cure. You receive care and recoat guidance for degreasers, brake fluid, coolant, and tire cleaners, plus cure-time rules for foot traffic, rolling toolboxes, and vehicle loads. If your shop needs striping, safety zones, or numbering, we can add epoxy line marking and stenciling after the topcoat schedule is set. The result is a dense, seamless surface that cleans fast, resists stains, and stays serviceable under real shop use.
Yes. Elite Epoxy Gainesville is licensed and insured, and we provide a written estimate that defines prep steps, materials, and the coating system.
Most projects are concrete slabs, including garages, patios, pool decks, warehouses, retail floors, and service bays. We evaluate the substrate to confirm it is suitable for coatings.
Yes. We can add traction with broadcast media or anti-slip additives in the topcoat, then balance grip with cleanability based on where the floor is used.
Standard epoxy can amber with UV exposure. For sunlit areas we recommend UV-stable clear coats like polyaspartic or aliphatic urethane to reduce discoloration.
Pricing depends on square footage, concrete condition, moisture and contamination, the amount of crack and joint repair, and the system selected (solid color, full flake, quartz, metallic, and topcoat type).
An auto shop epoxy floor is not the same as a decorative garage coating. In a working bay, the coating has to resist petroleum oils, brake fluid, ATF, coolant, battery acid splash, hot tires, jack stands, rolling tool chests, and point loads from vehicle lifts. Elite Epoxy Gainesville installs and repairs shop-grade epoxy and polyaspartic flooring systems built around correct concrete preparation, moisture testing, and chemical-resistant topcoats so the floor performs under daily service work.
Most auto shop floor failures trace back to the slab, not the coating. Oil contamination, tire residue, curing compounds, and dense power-troweled concrete can block adhesion unless the surface is mechanically opened with grinders and the right diamonds. We evaluate the slab, repair damaged areas, and specify the right primer, including moisture-tolerant epoxies when elevated RH is present. That foundation is what keeps coatings from peeling at lift posts, door thresholds, and traffic lanes.
For new installs, we build a system that matches how you work. Solid-color epoxy is a durable, cost-effective base, while a full flake broadcast adds texture and hides scuffs. In high-chemical bays, a urethane or polyaspartic topcoat adds improved stain resistance and easier cleanup. If you want a brighter shop, light-reflective grays improve visibility under LED lighting and help you spot leaks faster.
For repairs, we can remove failed coatings, feather edges, and recoat with compatible materials so the floor looks uniform and performs consistently. We also handle cove base, floor striping, and safety markings after cure schedules are confirmed. If you need an auto shop epoxy floor in Gainesville that is built for real service work, we provide a free written estimate and a clear scope of prep, materials, and downtime.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Gainesville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
