Residential · Gainesville, FL
Metallic epoxy flooring turns plain concrete into a seamless, high-gloss surface with depth and movement, built to handle real traffic. Elite Epoxy Gainesville has served Gainesville since 2018, installing and repairing metallic epoxy systems for garages, retail, offices, and showrooms.
A great metallic floor starts below the shine. We inspect the slab for laitance, sealer, moisture vapor, and previous coatings, then mechanically profile the surface with diamond grinding to a CSP 2-3 (or shot blasting for heavier build systems). Cracks and spalls are routed and repaired with 100% solids epoxy gel or polyurea, joints are cleaned and filled where appropriate, and the slab is vacuumed with HEPA filtration before primer. For best clarity and bonding, we apply a moisture-mitigating epoxy primer when readings warrant it, then build an epoxy base coat that gives the metallic pigments an even canvas.
Gainesville heat and humidity can change open time, flow, and cure, so we plan the pour and effects to match the day. Metallic pigments are broadcast and manipulated with spiked shoes, squeegees, and rollers to create marble, cloud, or lava-style patterns without lap lines. You choose the gloss level and traction, from a glassy showroom finish to a slip-resistant clear coat using aluminum oxide or polymer grit. For durability, we topcoat with a UV-stable polyaspartic or aliphatic polyurethane to improve scratch resistance, chemical resistance, and color stability under sunlight and bright interior lighting.
Customers choose us because metallic epoxy is not a one-coat paint job, it is a controlled system with tight timing and clean application. Our crew focuses on measurable prep, correct mixing ratios, calibrated spread rates, and consistent edge work so the finish reads uniform from doorway to back wall. We handle both new installs and repairs, including peeling from poor prep, fisheyes from contamination, hot-tire pickup, and wear paths in commercial spaces. You get straight answers on what can be fixed versus what should be removed and rebuilt for a reliable bond.
Before we leave, we walk the floor with you under good lighting and mark any areas that need touch-up before full cure. You receive clear care guidance, including cure times, when to move equipment back, and what cleaners to use (pH-neutral, non-citrus, no wax). We also provide a written scope that documents the system, coats, and topcoat type, plus recommended maintenance for long-term gloss. The result is a seamless metallic epoxy flooring surface designed for easy cleaning, strong adhesion, and a finish that looks intentional, not accidental.
Yes. Elite Epoxy Gainesville is licensed and insured, and we provide a written estimate that defines prep steps, materials, and the coating system.
Most projects are concrete slabs, including garages, patios, pool decks, warehouses, retail floors, and service bays. We evaluate the substrate to confirm it is suitable for coatings.
Yes. We can add traction with broadcast media or anti-slip additives in the topcoat, then balance grip with cleanability based on where the floor is used.
Standard epoxy can amber with UV exposure. For sunlit areas we recommend UV-stable clear coats like polyaspartic or aliphatic urethane to reduce discoloration.
Pricing depends on square footage, concrete condition, moisture and contamination, the amount of crack and joint repair, and the system selected (solid color, full flake, quartz, metallic, and topcoat type).
Metallic epoxy flooring is a multi-layer resin system that creates a 3D, reflective look over concrete using metallic pigments suspended in epoxy. It is a popular choice for garages, lobbies, retail floors, salons, offices, and man caves because it is seamless, stain resistant, and easy to clean. The difference between a floor that stays glossy for years and one that peels or looks blotchy comes down to moisture testing, mechanical surface prep, and a topcoat that matches the space.
Our metallic epoxy flooring process starts with evaluating the concrete and the environment. We check for oil contamination, curing compounds, and failing coatings, then create the correct concrete surface profile with grinders and industrial vacuums. After crack repair and priming, we install a pigmented epoxy base coat followed by the metallic layer, controlling working time so the pigments flow and blend without harsh stop marks. If your existing metallic floor is intact but dull or scratched, we can abrade and re-topcoat to restore depth and gloss without a full removal, when conditions allow.
Finish performance depends on the clear coat. For most interiors we recommend an aliphatic urethane or polyaspartic clear for better scratch and chemical resistance, plus improved UV stability compared to basic epoxy clears. In garages and commercial entries, we can add traction media to reduce slip risk while keeping the metallic look. We will also explain realistic expectations: metallic floors show dust, and darker colors highlight fine scratches, so the right color, sheen, and maintenance plan matter.
If you are comparing bids, ask what CSP the installer targets, whether they moisture test, what 100% solids products they use, and which topcoat is specified in writing. Elite Epoxy Gainesville provides a free written estimate, a clear system recommendation, and a plan that fits your traffic, lighting, and cleaning needs so your metallic epoxy flooring looks sharp and stays bonded.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Gainesville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
