Commercial · Gainesville, FL
Commercial epoxy floor prep is where floor systems succeed or fail, and Elite Epoxy Gainesville has served Gainesville since 2018. We prepare concrete with diamond grinding and steel shot blasting to the right Concrete Surface Profile (CSP) so epoxy, urethane, and polyaspartic coatings bond and stay down.
Proper prep starts by verifying the slab and removing what blocks adhesion. We inspect for curing compounds, sealers, oil contamination, paint, adhesive residue, hard trowel burn, spalling, and soft cap. Then we mechanically profile the concrete with planetary grinders and walk-behind shot blasters, using industrial HEPA dust extraction to keep the site cleaner and protect adjacent operations. We target the CSP needed for the system (often CSP 2-3 for many epoxies and CSP 3-5 for thicker builds), then repair cracks, joints, and divots with epoxy mortar, polyurea joint filler, or cementitious patch as appropriate.
In Gainesville, humid air and frequent wet traffic make moisture management and texture choices matter. We can perform moisture vapor emission testing (ASTM F1869) and in-slab relative humidity testing (ASTM F2170), then recommend a moisture-mitigating epoxy primer when needed. For slip resistance and cleanability, we dial in the finish with the right profile and broadcast media, such as silica sand, aluminum oxide, or quartz, and vacuum back to a uniform texture. From food service to warehouses and showrooms, we prep for the coating you specified, whether that is a high-build 100 percent solids epoxy, a urethane mortar system, or a polyaspartic topcoat.
Customers choose us because we treat prep as its own scope, not a quick step before coating. You get documented surface preparation, clear acceptance criteria, and work that matches manufacturer data sheets, ICRI CSP guidance, and jobsite safety expectations. Our crew shows up with the right equipment for production work, including planetary grinders, shot blasters, edge grinders, crack-chasing saws, and HEPA vacuums, so we can hit square-foot targets without cutting corners. We also schedule around your operations with phased areas, night or weekend work when available, and clean transitions for other trades.
At closeout, we walk the slab with you and confirm the profile, repairs, and readiness for primer or the first coat. We remove dust and loose media, detail edges, and verify that joints, cracks, and patches are stable and flush to your requirements. You receive a written scope, the target CSP, notes on moisture testing results if performed, and a plan for primer and coating timing so the floor stays within recoat windows. If you are bringing in another coating installer, we can prep to their spec and leave the slab ready for immediate installation, reducing downtime and rework.
We finish every project with a practical handoff that protects your schedule and your coating investment. That includes staging, containment, and dust control, plus clear communication on cure times, access restrictions, and when forklifts, pallet jacks, and foot traffic can resume. When the prep is complete, your floor is not just cleaner, it is mechanically profiled, repaired, and ready to bond, which is the difference between a coating that lasts and one that peels. If you want the job done right the first time, start with professional epoxy floor prep and a written plan.
Yes. Elite Epoxy Gainesville is licensed and insured, and we provide a written estimate that defines prep steps, materials, and the coating system.
Most projects are concrete slabs, including garages, patios, pool decks, warehouses, retail floors, and service bays. We evaluate the substrate to confirm it is suitable for coatings.
Yes. We can add traction with broadcast media or anti-slip additives in the topcoat, then balance grip with cleanability based on where the floor is used.
Standard epoxy can amber with UV exposure. For sunlit areas we recommend UV-stable clear coats like polyaspartic or aliphatic urethane to reduce discoloration.
Pricing depends on square footage, concrete condition, moisture and contamination, the amount of crack and joint repair, and the system selected (solid color, full flake, quartz, metallic, and topcoat type).
Epoxy floor prep is the critical step that determines whether a commercial coating bonds for years or fails in months. Elite Epoxy Gainesville prepares concrete for epoxy, urethane, and polyaspartic systems using mechanical surface preparation, mainly diamond grinding and steel shot blasting, to achieve the correct Concrete Surface Profile (CSP) for the specified build. We focus on adhesion, flatness at transitions, and a clean, sound substrate so primers and topcoats can perform as designed.
Our epoxy floor prep process starts with evaluating the slab condition and the contaminants that cause bond failure, such as oil, tire plasticizer, adhesive, curing compounds, and dense troweled finishes. We then select the right method for the floor area and the system requirements: planetary grinding for controlled material removal and edge detail, shot blasting for fast, consistent profiling on larger open slabs, or a combination of both for best results. The goal is a clean, open-pore surface that matches ICRI CSP guidance and the coating manufacturer’s data sheet.
Because moisture is a common driver of coating issues in Florida, we can test and document slab moisture using ASTM F1869 (calcium chloride) or ASTM F2170 (in-slab relative humidity). If readings are elevated, we can recommend a moisture-mitigating epoxy primer or adjustments to the system build. We also address joints and cracks with appropriate materials, such as polyurea joint filler for movement joints or epoxy mortar for static repairs, so the coating has a stable base and clean lines.
Whether you manage a warehouse, retail space, auto service bay, or commercial kitchen, proper prep reduces downtime, callbacks, and premature failure. If you need a coating installed by our team, we prep to our own installation standards; if another contractor is applying the coating, we can prep to their CSP and acceptance criteria and hand off a slab that is ready for primer. For commercial epoxy floor prep in Gainesville, request a written estimate and a clear plan for grinding, shot blasting, repairs, and dust control.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Gainesville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
